This high-frequency electrosurgical equipment is suitable for monopolar, bipolar precision surgery and micro-surgery without tissue alterations, allowing surgical treatments to be performed with programmable operating times in thousandths of a second, or to operate with traditional methods.
Thanks to its peculiar and innovative features, such as the touch interface, it is suitable for use, in particular, with resectors, mini-resectors and electrodes of 5 Fr. in saline solution, showing results comparable to devices with a much higher cost.
To ensure maximum safety conditions, the electrosurgical unit monitors the OC plate/patient circuit in real time, the power emitted, as well as being equipped with the self-diagnosis function.
|Working frequency||360Khz + - 10% monopolar and bipolar|
|Output power||Pure cut monopolar 200W / 300Ohm, NaCl solution bipolar cut 120W / 50Ohm.|
|Output circuit||Floating, isolated from ground at high and low frequency|
|Footswitch||Double function (IPN8).|
|Monopolar using||With one or two handles, instrument with handle or footswitch control.|
|Bipolar using||Footswitch control|
|Pulse timing||Duration setting from 10 millisec. to 30 sec.|
|Autodiagnosys||By two microprocessors with self-test on power-up; continuous control during operation and block function in case of failure with error code displaying|
|Neutral control electrodes||By use of double or single section electrodes with acoustical and visual alarms|
|Power supply||230 VAC - 50 Hz, 750 VA.|
|Classification||Class I type CF.|
|Compliant with||CEI EN 60601-1, CEI EN 60601-2-2.|
|Dimension and weight||370 x 144 x 319 (l x h x p) mm., weight 6Kg.|